Behavior Analysis: Line crossing detection, intrusion detection, object removal detection, unattended baggage detection

DS-2CD2347G2-L(U) - Pro Series (All) - Hikvision

CBR stands for constant bit rate, aims for a constant or unvarying bandwidth level with video quality allowed to vary It works OK on Motion detection, Line Crossing detection, but the LEDs stay on when it's triggered under Intrusion detection. Lens Type & FOV 2.8 mm, horizontal FOV: 109°, vertical FOV: 55°, diagonal FOV: 138°; 4 mm, horizontal FOV: 94°, vertical FOV: 48°, diagonal FOV: 115°; 6 mm, horizontal FOV: 57°, vertical FOV: 31°, diagonal FOV: 67° Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links. Being unfamiliar with Hikvision, there are quite a few settings that I don’t know what they mean and I may ask for an explanation in due course if that’s OK...So what I’ve done here is some sample snapshots from the 8MP DS-2CD2087G2-LU, the original 4MP IPC-T2347G-LU (DS-2CD2347G1-LU) and the 8MP IPC-T2385G-I (DS-2CD2385G-I).

DOWNLOAD EU PORTAL

The Hikvision DS-2CD2347G1-LU is a 4MP turret camera from the new ColorVu range of cameras release in June 2019.

Am very happy with the images apart from the porch camera which is affected slightly by the close proximity of the porch light: It causes a slight purple haze, and darkens the image further out, even thought the light itself is not in direct view of the camera. I need to try and change the porch light to see if I can improve the situation.

DS-2CD2347G1-LU - Firmware update | IP Cam Talk DS-2CD2347G1-LU - Firmware update | IP Cam Talk

I bought a Hikvision NVR (DS-7608NI-K2 / 8P) and a Hikvision DS-2CD2347G1-LU camera. The problem is that the camera is not working properly or I have something wrong.It’s not a totally even comparison as the DS-2CD2087G2-LU camera has a 6mm lens, the others have a 4mm lens. Thanks @alastairstevenson helping us here for the colorvu cams G1 and G2 compare. Though are don't sell hikvision cams a lot, but still try to make this forum with more diversified No unfortunately not - the K series uses different firmware. I’d assumed the issue was with the camera firmware rather than NVR. The camera uses the Hi3516CV500 SoC which has a fast dual-core CPU with secure boot and built-in NNIE (Neural Net Inference Engine) for video analytics. The G1 ColorVu is single-core. But I think it’s fair to say that there isn’t really much to choose between the 8MP and 4MP ColorVu cameras for low-light capability.